Why Does My Tap Water Taste Like Chlorine (or Metal)? Causes and Easy Fixes

Tap water usually tastes like chlorine because your water utility adds chlorine or chloramine to kill germs. A metallic taste usually comes from iron, copper, manganese or zinc, often from pipes or low-pH water. Both are common, and a good filter can remove the taste. One important note: lead has no taste, so a "normal" taste doesn't rule it out.

That "pool" taste: chlorine and chloramine

Most U.S. water utilities disinfect water so it stays safe as it travels through miles of pipes to your home. They typically use chlorine or chloramine (chlorine combined with ammonia). The EPA explains how utilities use chloramines for this.

This is a good thing for public health. But it can leave a taste or smell that many people notice. You might taste it more when:

  • You live close to the treatment plant
  • Your utility temporarily increases disinfection, often after pipe work
  • You drink water at room temperature instead of cold

That metallic taste: common causes

According to the EPA's secondary drinking water standards, several substances can give water a metallic taste:

Possible cause Other signs (per EPA)
Iron Rusty color, sediment, reddish or orange stains
Copper Blue-green stains
Manganese Black to brown color, black stains, bitter taste
Zinc Metallic taste
Low pH (acidic water) Bitter metallic taste, corrosion of pipes

The EPA notes that corrosive water can eat away at iron and copper pipes, giving the water a metallic taste and staining fixtures. Older homes and homes with well water are more likely to notice this.

Important: lead has no taste

Many people assume they'd notice if something harmful were in their water. But the EPA says you cannot see, taste or smell lead dissolved in water. If your home has older plumbing, testing is the only way to know. Our article on EPA warnings about lead water pipes explains more.

Easy fixes you can try today

  1. Chill your water. Cold water tends to taste less of chlorine than room-temperature water.
  2. Run the cold tap for a short time if water has been sitting in the pipes for hours, and use cold water for drinking and cooking, as the EPA recommends for lead.
  3. Read your water report. Your utility publishes a yearly Consumer Confidence Report that lists what's in your water.
  4. Test your water if you notice a metallic taste, stains or discoloration, or if you have older pipes or a private well.
  5. Use a filter designed for the problem you have.
Front view of the Melissani M1 countertop reverse osmosis water purifier that reduces chlorine taste

How a reverse osmosis filter helps

A countertop reverse osmosis system targets both kinds of taste problems. According to the Melissani M1 product page, its 5-stage filtration reduces chlorine, lead and rust, along with PFAS, fluoride, viruses and microplastics.

Here's how the stages work together, according to our technical specifications:

  • Stages 1 and 2 (PAC filter): remove dirt, metal and large particles, plus chlorine, VOCs and THMs.
  • Stage 3 (RO membrane): filters out the smallest impurities, down to 0.0001 microns.
  • Stage 4 (activated carbon): improves taste.
  • Stage 5 (UVC light): targets bacteria, viruses and mold.

And because it sits on the counter, there's no plumbing to change, which is great for renters.

What if your filtered water tastes metallic?

If water from your M1 starts to taste different or metallic, it may be time for new filters. Our filter replacement guide lists a changed or metallic taste as a sign to replace them. The troubleshooting guide also suggests running 2–3 cleaning cycles and using fresh, cold tap water.

Installing a new replacement filter in the Melissani M1 countertop reverse osmosis system

The easiest way to stay ahead of this is Filter Club. A full year of filters ships automatically every 12 months for $199.00 (vs. $299.00 one-time), and you can cancel anytime.

When to call your water utility

A steady, mild chlorine taste is normal for many homes. But some changes are worth a phone call:

  • A sudden change in taste or smell
  • Water that turns cloudy, brown or discolored
  • New staining on sinks or fixtures

Your utility can tell you about main breaks, flushing or treatment changes in your area. Its contact details are usually on your water bill and in your Consumer Confidence Report. If you're on a private well, consider having your water tested.

Key takeaways

  • A chlorine taste usually comes from disinfection that keeps tap water safe.
  • A metallic taste often points to iron, copper, manganese, zinc or low-pH water.
  • Lead has no taste or smell, so test if you have older pipes.
  • Chilling water, running the cold tap and reading your water report are easy first steps.
  • The M1's 5-stage RO filtration reduces chlorine, lead and rust with no installation.

Frequently asked questions

Why does my tap water taste like chlorine?

Most water utilities add chlorine or chloramine to kill germs. The taste is usually stronger in room-temperature water and closer to the treatment plant.

Why does my water taste like metal?

A metallic taste often comes from iron, copper, manganese or zinc, or from acidic water that corrodes pipes, according to the EPA.

Is chlorine-tasting water safe to drink?

Chlorine is used to make tap water safe, and utilities must meet EPA standards. If you're concerned, read your Consumer Confidence Report or test your water.

Can I taste lead in my water?

No. The EPA says you cannot see, taste or smell lead dissolved in water. Testing is the only way to know.

Does reverse osmosis remove the chlorine taste?

Yes. The M1 reduces chlorine as part of its 5-stage filtration, which includes carbon stages and an RO membrane.

Fix the taste for good

Enjoy water your family actually wants to drink. Get the M1 at 50% off with Filter Club, a full year of filters included.

Back to blog